Time Management, Forward Momentum, and a Revelation

Since I started working on several pieces at once, I've found my productivity has greatly increased.  This shouldn't come as any great surprise, of course, because it's really just common sense, but I was always afraid that if I had more than two pieces in progress at any one time, I might become scattered and unable to focus my energy on anything long enough to finish any of them. In the last year or two, though, ideas have been coming at me so fast and furiously that I feared I'd lose them altogether if I didn't at least get the pieces started.

Happily, this shift in my working habits has really worked out well, allowing me to work on a piece until I got stuck, then let it rest, ideas percolating quietly while I forged ahead with something else. I don't get bogged down or frustrated with one piece.  I don't obssess. To put it succinctly, I am wasting lots less time than I did previously.

I thought it might be nice to share some of this process by showing you what I was also working on while finishing The Spell is Broken.

Here are three pieces I've been working on.  The tall one standing up behind the book is one that went oddly astray.  It might be due to the fact that I had no real clear plan, but only a nebulous idea of "an old map", which came to me while looking at a foxed and stained vintage book page.  The parts around the perimeter of the piece came together pretty quickly and easily, but the main focus - the map part in the center - did not. I knew I wanted the rivers to be done in embroidery, but had little else in mind.  I fugured something would occur, as it usually does.

 

Nope.  I tried a figure, a dragonfly, maybe 8 or 10 other ideas, but - nope. Anything I could come up with was only overshadowed by the now too detailed (I thought) perimeter.  Everything I tried had to be ripped off, if I had gotten hopeful enough to even glue it down.  So there it sat.

I started working on an idea I'd had for a long time, called Book of Secrets.  Finally I'd been able to find a black book large enough for the project, which had been my major roadblock up to this point.  I cut out the part of the front cover where I inteneded to insert the smaller book cover, and bent some copper sheeting around the edges. Meanwhile, I also did some alteration on the design on the small cover, and found a keyhole escutcheon to put in the center, as well as some locks and things that will go on later.

The hardest part thus far has been attaching the snakeskin; despite copious amounts of acrylic gel medium, I'm not sure how well-secured it is, or how well preserved.  The stitches around the bottom edge are there as much to hold it in place as for decoration. I'm not sure I would reccommend sewing a snakeskin onto a book, but if you do, it would probably be best to split the snakeskin so it's flat instead of tubular.  I'm just sayin'.

One Saturday morning when I got tired of fighting with the snakeskin, I started the piece in the back of the photos.  This one came together pretty smoothly; the thing that slowed it down was just the huge amount of stitching.

Here is the finished piece, entitled Revelation. I'm pretty pleased with how it turned out. I'll be showing you further progress on the other two soon, along with another new one!



What processes, methods, or approaches work best for you in the studio?  I'd love to hear your ideas!

FINI!

It took most of the summer, but I have finally finished my "Book of Dreams".  At several points in the process, things did not go smoothly or according to plan.  You can read about the whole adventure here, here, here, here, here, and here, if you wish.  (Wow- that's a lot of "here"s! This really was more of an ongoing series than I realized.)  One of my purposes in posting each stage of the book's creation was to share my thoughts and technical processes with others who might be able to learn from my techniques- and from my mistakes.  So, if any of these posts has helped you in any way, I feel I have accomplished that goal. (Or even if my cluelessness brought  you some laughter, I'm happy to entertain!)

Front Cover

detail

 

detail

1st spread

detail

detail

2nd page spread

detail

3rd page spread

detail

detail

detail

open

If you recall, I had a problem with the spine, and ended up slicing it apart down the middle because it wasn't quite wide enough for the pages.  I thought long and hard about how best to fix it.  My first idea was to sew something, such as the spine of another book, over the cut, using the same stitching I used on other the pages.  I quickly realized, however, that I couldn't do that because the pages were already glued in; there was no place to put the needle through. My second thought was yikes- I've totally ruined the whole thing.  I was afraid that if I just glued some kind of paper onto it, it might not be strong enough to take the repeated opening and closing that the book was likely to have to endure, and wouldn't look right, besides.  Luckily, while looking at book binding supplies for the guest book I'm making for my daughter's wedding, I happened to see this Lineco Satin Cloth Tape.  I thought it was worth a try, so I ordered it, and it worked- in fact, the width was perfect.  But the tape was so pretty and shiny and new-looking that it seemed out of place in contrast with the old, well-used appearance of the rest of the book.  I attempted to resolve this by gluing on a 'skin' of dried acrylic gel I had peeled off from the earlier front cover fiasco.  You can see this on the photo of the back cover, below.  I'm still not sure about it, but have decided to leave it be for now.

back cover

FINI!  (The End)

Spread #3 of Book of Dreams

I have finished the third, and last, spread for the Book of Dreams!  (You can see earlier stages here, here, here, and here.)  This page is almost purely a monotype, with just some added watercolor pencil here and there to darken or blend the different areas of color.

 I'm still not sure that it doesn't need to be darkened a bit more, but I think I'll let it rest for a while until I can decide.

Here are few close-up details:

Unfortunately, I haven't quite solved my binding issues.  The structure of the book is actually similar to a child's board book, which I believe, in bookbinding parlance, is called a drum leaf binding. 

 Because mine was not done in the proper order, it is a bit wonky, but "live and learn", as they say. Thanks to Mo Crow for the link, and for all the other instructions and suggestions. 

 When I got all of the pages glued together, I discovered that the spine of the original book was only a tiny bit too small.  So, since the spine doesn't serve a structural function in this case (the end pages are glued onto the covers, not the spine), I think I may be able to do a cosmetic fix by just sewing on a strip of something(?) to hold the edges together and make it look better.

And then, I'll need to do something with the back cover, so stay tuned for more disasters and discoveries!

Book of Dreams middle pages + Uh-Oh

The second, and center, spread of my altered book Book of Dreams is finished.  (Click here, here and here to see earlier parts of my process.)  I'm pretty satisfied with the outcome of the pages, though I did struggle for a bit.  I regret to say that I didn't photograph earlier stages, due to the fact that I got carried away and forgot, but also because it was just too embarrassing at some points- it will have to remain my deep, dark, secret.  Kidding, of course, but it really was that kind of "what was I thinking?" ugly that you just want to forget!

Anyway, here it is:

2nd spread of Book of Dreams

ingredients: monotype on Rives BFK,image transfers, mica, metallic ink, ink jet prints, map fragments, Derwent watercolor pencils, Caran D'ache crayons, artist pens, feathers, stitching

However, I have encountered a major problem.  Leave it me to do things bass-ackwards and try to make altered books without really having much knowledge of bookbinding technique. So, here's what happened. 

I think I mentioned in one of my earlier posts that the binding of the book was in bad shape.  I also took out a bunch of pages to make room for the paintings.  Right now, the first 2-page spread is glued to the front cover.

But here's the real problem (well, one of them): When the book is open flat, the painting fits perfectly.  But when you try to close it...

not so much.  And here's the other issue... The spine of the book is very thin.  I thought that if I took out most of the pages, it would be big enough to contain 3 spreads.  But now I'm thinking...

not so much.

So, what to do?  Right now I'm considering gluing the pages together, kind of like a board book, then cutting the spine in half down the middle, and sewing a wider spine from another book onto it to hold the 2 parts together...  I dunno.

But it's been one of those days, anyway, if you know what I mean.  Have you ever started to shake a bottle of ink, thinking the top is screwed on... but it's not?

Who knew I looked so good in bronze?  This is the only way I'll ever have a tan, but it would definitely take a much bigger bottle to do the job!


Hope your day is going better than mine...

Book of Dreams Ist pages complete!

In our last episode, we saw what we thought was the final version of the 'floating girl' spread.  Sadly, I was mistaken about that- or, sadly mistaken, as my mom used to say.  I realized that the white specks I was seeing on the photos were at least partially caused by little tiny spaces where the colored pencil wasn't covering the oil-based ink of the monotype beneath it.  So, like an idiot, I repainted the entire figure,  except for the dress. That set me way back, because I was never satisfied, and therefore kept painting over what I had already painted over... Finally, I just said to myself, Stop now before you go crazy. And the surprising part is- I actually did.  Stop, I mean.  (Crazy is a whole other can of worms, which I won't go into right now.)

Now I'll go back to what I did before that, in real time.  Prior to and partially during the work on the monotype part of the spread, I had to prepare the pages in the book onto which it was going to be glued.  On both sides, I stuck the first 3 pages together to create a thicker, sturdier surface to attach everything to.  (I could not yet glue them to the book cover because I knew there was going to be stitching.)  I laid the monotype down to determine where its placement and drew around the edges so that I would know what portions of the pages would be showing when the whole spread was assembled. After gluing down some collage elements such as vintage book pages, maps, and sewing pattern pieces, image transfers of the same cuneiform letters I had used on the front cover were added.

left side collage

These were followed by the eggs, which had been printed on tracing paper.  the paper wrinkled when I tried to glue it into place, but I liked the effect, so I left it. Lastly, the stitching was done.

right side collage

right side detail

 After finishing the stitching, I glued the left side page to the back of the book cover.  I also used some book-binding tape in an attempt to further strengthen the attachment of the pages to the cover.  (You can't see all of that here.)

 At that point, it was time to glue the monotype (floating girl) into place.  But first, there were a few more details to take care of- just little tweaks here and there.  The only change of note was the addition of the feathers...

which were generously donated by my friend's pet parrot.  So here's the final version...

I think...                                           

What do you think?

Interconnections

Handmade Artist's Book

I thought I'd share a few pages of my handmade book, since few people have seen it. The book measures 8 x 12.5 inches and contains 20 pages. All pages are transparent acetate, so the pages beneath can be seen through them, creating a multi-layered effect. The cover is basically a folded "box", also made of acetate, and closed with a shell and gold braided cord. Thanks to Colin for doing a great job on the photos. (Really, I was just teasing about the praying mantis thing.) Also, I just learned something- the photos appear opposite the order in which they were downloaded, so the cover is at the bottom. Oh, well...